Caterpillar 12 H motor grader
|
|
ID: 549 | Ref MOD:32973
Units Available for sale: 1
Condition:
Mileage Hrs/Kms: 7,500
Year of Manufacture: 2005
|
|
All prices are based on "per individual unit" purchased, any reductions on advertised price for multiple item orders is subject to negotiation and is conducted at the time of inspection or provision of LOI.
|
|
Photo's shown above may represent a vehicle type rather than an actual vehicle,
vehicles are available serviced and painted to customers preference. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.
|
SPEC SHEET (Description) Caterpillar 12 H motor grader
|
Caterpillar 12 H grader, 2005 year, 7,500 hours, ex government department, 12 ft blade, air conditioing, EROPS cabin, piped for ripper. This Cat 12H grader is without a Ripper, but we can fit a ripper to a machine, the additional cost is £7,800
Technical specs Caterpillar 12 H grader
Engine Caterpillar C-9 ETA VHP Net Power Gear 1-2 145 hp 108 kw Net Power Gear 3-4 165 hp 123 kw Power Measured @ 2000 rpm Net Power Gear 5-6 165 hp 123 kw Number of Cylinders 6 Net Power Gears 7-8 165 hp 123 kw Max Power 165 hp 123 kw Displacement 537 cu in 8.8 L
Operational
Std Operation Weight - Front Axle 8346 lb 3784 kg Std Operation Weight - Rear Axle 22974 lb 10416 kg Std Operation Weight - Total 31320 lb 14200 kg Max Operation Weight - Front Axle 13744 lb 6234 kg Max Operation Weight - Rear Axle 32074 lb 14549 kg Oil System Fluid Capacity 7.1 gal 27 L Max Operation Weight - Total 45818 lb 20783 kg Fuel Capacity 100 gal 378 L Cooling System Fluid Capacity 11.6 gal 44 L Hydrauilc System Fluid Capacity 19.5 gal 74 L Rear Diff/Final Drive Fluid Capacity 12.2 gal 47 L Circle Gearbox Fluid Capacity 1.8 gal 7 L Tandem Case Fluid Capacity (each) 16.9 gal 64 L Tire Size 14.00-24 12PR Operating Voltage 24 V Alternator Supplied Amperage 75 amps
Transmission Caterpillar 12 H grader
Type direct drive power shift Number of Gears - Forward 8 Number of Gears - Reverse 6 Max Speed - Forward 27.4 mph 44 km/h Max Speed - Reverse 21.6 mph 34.7 km/h
Steering Caterpillar 12 H grader
Articulation L/R 50 degrees Turning Radius 24.3 ft in 7.4 m
Front Axle
Wheel Lean 18 degrees Oscillation - Total 32 degrees Ground Clearance 2 ft in 594 mm
Hydraulic System
Pump Type variable piston Pump Flow 51.9 gal/min 196 L/min Relief Valve Pressure 3500 psi 24150 kPa
Moldboard
Moldboard Width 12 ft in 3658 mm Moldboard Height 24 in 610 mm Moldboard Thickness 0.87 in 22 mm Max Depth of Cut 28.9 in 735 mm Side Shift Left 20.6 in 524 mm Side Shift Right 26 in 660 mm Blade Pull at Max Weight 28867 lb 13094 kg Blade Down Pressure 23807.7 lb 10799 kg
Circle Caterpillar 12 H grader
Diameter 60.2 in 1530 mm Rotation 360 degrees Shift Left 27.4 in 695 mm Shift Right 28.7 in 728 mm Max Reach Outside Tires - Left 73.6 in 1859 mm Max Reach Outside Tires - Right 71.2 in 1809 mm Max Lift Above Ground 18.9 in 480 mm Blade Tip Angle - Front 40 degrees Blade Tip Angle - Rear 5 degrees
Dimensions Caterpillar 12 H grader
Height to Top of Cab 10.2 ft in 3107 mm Overall Length 28.1 ft in 8571 mm Width Over Tires 8 ft in 2440 mm Wheelbase 20 ft in 6086 mm Blade Base 8.4 ft in 2575 mm Tandem Axle Wheelbase 5 ft in 1523 mm Rear Ground Clearance 1.1 ft in 341.5 mm Front Ground Clearance 2 ft in 594 mm
Selected Dimensions 12 H grader
A. Overall Length 28.1 ft in 8571 mm B. Width Over Tires 8 ft in 2440 mm C. Height to Top of Cab 10.2 ft in 3107 mm D. Wheelbase 20 ft in 6086 mm E. Rear Ground Clearance 1.1 ft in 341.5 mm F. Front Ground Clearance 2 ft in 594 mm G. Tandem Axle Wheelbase 5 ft in 1523 mm H. Blade Base 8.4 ft in 2575 mm

Please note these are not M.O.D owned assets
Location:
The Rocket site, DN10 6ET, Doncaster, The UK
The Rocket site, DN10 6ET, Doncaster, The UK
Export Requirements:
NLR Stock (No Licence Required)
|
GENERAL TERMS
All prices qoted are GBP U.K. Pounds Sterling Ex. Works excluding VAT where applicable and shipping / associated costs.
Vehicles advertised are subject to remaining unsold.
All prices quoted are based on "per individual unit" purchased, any reductions on advertised price for multiple item orders is subject to negotiation
and is conducted at the time of inspection or provision of LOI.
For complete Terms & Conditions See Main Website. Sale Terms... Click to View Details
SPARE PARTS
We stock parts and accessories for every application: transmissions, repair kits, tyres, engines, undercarriage, belts, oils, filters and so much more!
We have a full stock of spare parts, new and second hand. These parts are always on stock which avoids and delays in ordering.
SHIPPING
Exports to any part of the world are possible and our freight department can deal with any shipment of equipment whether its 1 item or 1000 items. We can offer land, sea, or air freight.
Click to View Details
An export licence may be required for items sold to customers outside of the U.K.
For more information on Export Licencing procedures Click to View Details
Inquiry: 28666
|